1.5" Suspension Lift, Hilux (05-15): Winch Bumper / Light Load (EK1406WBLL)

Product Description

Fits:

Toyota Hilux (2005-2015)

Complete suspension kit suitable for vehicles with standard front bumper and light loads up to 200KG

This kit contains:

• Front Coil Springs (1 pair x 2885) - Winch bumper with winch
  
• Leaf Springs (2 x EL043R) - Up to 200Kg 
  
• Nitrocharger Sport Strut (2 x 90002)
  
• Rear Nitrocharger Sport Shock (2 x 60006)
  
• Greasable Shackle Kit (1 x OMEGS14)
  
• Spring Bush Kit (2 x OMESB98)
  
• U Bolts (4 x OMEU53A)
  
• Brake Proportioning Kit (1 x FK59)
  

• Front 30mm
  
• Rear 45mm

While ride height increases are attained with this kit, emphasis is placed on ride control improvements. Further fine tuning is achieved as the springs are precisely matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system, designed specifically to suit your vehicle. A 4WD equipped with this combination will exhibit better towing and load carrying characteristics, improved wheel travel, and will ride and handle better over any road surface.

Coil Springs:

When undertaking 4×4 remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components.

As part of their integrated 4WD suspension systems, Old Man Emu designs a range of coil springs for each vehicle, enabling the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle.

• Springs are formed on precision mandrels
  
• Scragging before and after shot peening to prevent sagging
  
• Constant and variable rate coils available for multiple applications
  
• Coil spring end configurations designed to exact specifications guaranteeing perfect fitment to your vehicle
  
• Durable powder coat finish
  

• Draw tapered and diamond cut leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.
  
• Bolt clamps and liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.
  
• Fully scragged and load tested: Scragging ensures the spring takes a permanent ‘set’ which reduces the risk of sagging. Load testing ensures the spring meets the required specification.
  
• Military wrap: Designed to provide added safety.
  
• Anti friction pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.
  
• Flat axle seat area: Allows a positive, safe axle mount reducing spring stress and increasing spring life.
  
• Shot peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.
  
• Two-stage leaf pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.
  

• Engineered for both on road drivability and off road touring
  
• Durability proven under extensive laboratory and Outback testing, supported by scientific data logging
  
• Instantaneously adapts to the terrain
  
• The most finely tuned 4×4 shock absorber on the market, with all valving work carried out in Australia by OME’s ride control engineers
  
• Dramatically improved low and high speed control for increased comfort and control over all road surfaces
  
• Fully compatible with OME’s extensive range of springs, bushes and hardware for a complete integrated 4WD suspension system
  
• Back-up from more than 120 authorised outlets Australia-wide, and also supported by ARB’s international dealer network
  
• 3 year, 60,000km warranty
  
• Made in Australia
  

Should your Old Man Emu 4WD suspension system include the fitment of Emu Dakar leaf springs, these leaf spring bushes require periodic lubrication to ensure longevity. OME greasable shackles and pins facilitate this task without the need to remove the shackles, thereby greatly reducing the time and effort involved.

• Unique, easy bolt together assembly – this eliminates out of angle ‘shackle pin to side plate’ problems commonly associated with press fit assemblies.
• Each pin has two grease outlet holes to guarantee maximum grease coverage between the shackle pin and the spring bush – increasing bush life and improving ride quality.
• Heat treated pins ensure long pin life under heavy loads and off road conditions
• Side plates are zinc plated for protection against corrosion

Manufacturer - Old Man Emu

Designed for superior performance across all terrain, an Old Man Emu suspension upgrade by ARB will provide noticeable improvements to a vehicle’s performance, including load carrying capacity and control characteristics.

Australia’s leading 4×4 suspension brand takes into account your individual requirements with specialist engineers spending hundreds of man hours testing and modifying various combinations in the demanding Australian Outback so you can find the most suitable solution for your needs.

ARB and Old Man Emu’s commitment to providing the most comprehensive range on the market has resulted in an extensive selection of quality products. From OME shocks to OME suspension kits, Old Man Emu products are backed by a minimum 3 years or 60,000km (whichever comes first) warranty and aftersales service that is unmatched by any other suspension company.

Customers also viewed

2" Suspension Lift, Ford Ranger (11-18): Medium Load

£1,422.21inc VAT £1,185.18ex VAT

2" Suspension Lift, Ford Ranger (11-18): Heavy Load

£1,422.21inc VAT £1,185.18ex VAT

1.5" Suspension Lift, Hilux (05-15): Standard Bumper / Heavy Load

£1,346.07inc VAT £1,121.72ex VAT

1.5" Suspension Lift, Hilux (05-15): Standard Bumper / Light Load

£1,346.07inc VAT £1,121.72ex VAT

1.5" Suspension Lift, Hilux (05-15): Standard Bumper / Medium Load

£1,346.07inc VAT £1,121.72ex VAT

1.5" Suspension Lift, Hilux (05-15): Winch Bumper / Heavy Load

£1,346.07inc VAT £1,121.72ex VAT

1.5" Suspension Lift, Hilux (05-15): Winch Bumper / Medium Load

£1,346.07inc VAT £1,121.72ex VAT

1.5" Suspension Lift, Hilux (15+): Medium Duty

£1,346.07inc VAT £1,121.72ex VAT

1.5" Suspension Lift, Hilux (15+): Heavy Duty

£1,381.18inc VAT £1,150.98ex VAT

1.5" Suspension Lift, Hilux (15+): Super-Heavy Duty

£1,416.29inc VAT £1,180.24ex VAT

40mm Suspension Lift, Long Travel, Heavy Load, Defender 110

£1,256.32inc VAT £1,046.93ex VAT

30mm Suspension Lift, Heavy Load, Defender 110

£956.27inc VAT £796.89ex VAT